Groen
TDB-20 Kettle
The
Groen
TDB series kettles are a self contained, electric,
steam jacketed kettle. The
Groen
TDB kettles work by having heating elements that
convert water into steam. The steam rises into the
jacket of the kettle and heats the product. The
product absorbs the heat from the steam and converts
the steam back into condensate. The condensate
returns to the bottom of the kettle where it is
reheated again into steam. This process is repeated
until your product reaches the desired temperature
that is set by the user on the thermostat. The
Groen
TDB kettle's thermostat can be set for product
temperature control between 150 F to 295 F,
standard, with other options available. The entire
system is sealed making it efficient and easy to
maintain. The Groen
TDB kettles are easy to use, reliable, efficient,
and are used by various
indutries
throughtout
the world. Capacities for the
Groen
TDB kettles are available in 10, 20, 24, 40, and 48
quart models.
Features:
Construction:
Kettle shall be of 304 stainless
steel, one-piece welded construction. All exposed
surfaces shall be stainless steel. All controls
shall be contained in a
gasketed enclosure. Unit
shall be furnished with a heavy reinforced rim with
a welded-in butterfly shaped pouring lip for maximum
sanitation and durability. Right or left hand tilt
handle. Faucet bracket is standard and mounted on
rear of electrical control box.
Finish:
Interior of kettle shall be
polished to a 180 emery grit finish. Exterior of
kettle shall be finished to a bright high buff
finish, ensuring maximum ease in cleaning and
maintaining brilliant appearance.
ASME
certified and UL listed:
Unit shall be
ASME
shop inspected, stamped and registered with the
National Board for operation up to a maximum working
pressure of 50 PSI. Unit shall be
U.L.
listed.
Sanitation:
Unit shall be designed and
constructed to meet NSF and known health department
and sanitation codes, and be NSF listed.
Controls:
Controls shall include a
thermostat, built in contactor, pressure gauge,
front mounted water sight glass and heating
indicator lamp.
Safety:
Kettle shall have safety tilt
cut-off (cuts off heat when tilted to 12° and
above), pressure relief valve, high limit pressure
switch and low water cut-off. 24V control system.
Performance/Features:
Unit shall be thermostatically
controlled to automatically shut off when desired
temperature is reached and to turn on when product
temperature falls below desired setting. Design
shall make it possible for one person to tilt
kettle, even when kettle is filled to capacity.
Pouring height allows filling of 4” high pans on the
table top. Tilt handle is field reversible for right
or left.
Installation:
Single electrical connection
required. Specify 208/240 or 480 Volt, single or
three phase. Standard unit shall be shipped 208V /
3Ph and be field convertible from three phase to
single phase operation. Remote steam source is not
required.
